How To Remove Peeling Clear Coat From Wheels

Home

Models, Books, and Shirts

Gifts For The Car Guy!

Car Movies

Trans Am Parts

Car Television

FAQ

Links

Search Trans Am on Ebay

Magazines

About my '78 T/A

Books That I have Read

Rare Pontiacs

Tips & How To

Old Car Ads

Web Surfers Cars

Car Posters

Where to Buy/Sell your T/A

Gallery

Old Trader Ads

Other websites that I have created

Site map

My Photographs

HOW TO STRIP AND CLEAR COAT ALUMINUM WHEELS

Are your wheels looking dingy and no amount of cleaning helps that much? Do you have clear coat peeling? Tired of polishing your wheels weekly?
You can fix it on your own for about $50!

You�ll have to have the tires removed from your wheels first (don�t try this with tires on, you�ll hate yourself). You can strip the wheels with any good grade of paint striper such as Kleen Strip, or �aircraft striper�. You MUST have proper neoprene gloves, latex will not work. Use goggles and a dust mask too. Put the striper in a spray bottle, and spray it on the face of the wheel (do 1 wheel at a time), the clear coat will start to bubble up immediately, but give it 15 minutes, Now scrub the wheel with steel wool moistened with a little stripper, it�s MESSY!! Now re-spray and scrub again.
The wheel is stripped now, but is a sticky mess, so wash it with steel wool and mineral spirits. Rinse the wheel, and after it�s dry see if there is any remaining clear coat. If any paint remains re-strip the wheel.

If you have any nicks or scratches, now is the time to fix them. Correct nicks with a die grinder and a gentle touch. Sand out scratches with 320 grit paper.
Now clean wheels with fine steel wool and �liquid sandpaper� to get any traces of remaining paint. This also buffs the wheels. Next clean and brighten the wheels with an acid type wheel cleaner (the ones that say there NOT for clear coated wheels). If you want to paint the inserts or between the spokes, do it now with a lacquer paint.

You�ll need a catalyzed urethane clear coat paint, I used Glisten PC by POR-15. it�s made especially for wheels. One hour before you start painting, mix the catalyst and clear coat and stir it up, put the cap back on. While you wait for the paint to catalyze, rub down the wheels with isopropyl alcohol. Wearing a quality cartridge mask, you can brush on the first coat to get in the nooks and crannies. Wait 25 minutes, now spray the following coats with a touchup gun or even one of those rechargeable spray cans. I applied about 5 coats, waiting� 25 minutes between coats. The paint will tack up in 3 hours, but needs 3-4 days to get really hard. Your wheels now look like NEW!
� A special thanks to Scott for this article

Shop Eastwood for your Auto Restoration Needs!